ICA Driver Ver. 4.1.3a (Mac)
Canon Maxify ICA Driver Ver. 4.1.3a (Mac)
Download Too: Multifunction Printers security patch
Precaution
1.[OS v10.11, 10.12, 10.13, 10.14, 10.15, 11.0]
When scanning is executed with the setting of 25dpi/grayscale/Descreen, the connection with the device is terminated. If using the ICA driver, please do not scan with these settings.
2.[OS v10.11, 10.12, 10.13, 10.14, 10.15, 11.0]
Scanning cannot be performed in the other user environment by switching users. The error message is displayed. Please reconnect the computer with the printer, and scanning can be performed.
3.[OS v10.11]
(USB)Launch IJ Scan Utility in advance before scanning from the product (Push-scan).
4.[OS v10.12, 10.13, 10.14, 10.15, 11.0]
(USB)Due to a change in the OS specifications, scanning from the product (by using the SCAN button) is not available. Perform scanning from a PC.
5.[OS v10.12, 10.13, 10.14, 10.15, 11.0]
Phenomenon: When an error occurs while scanning from ImageCapture, the Scan button is grayed out and cannot be pushed.
Solution: Restart ImageCapture.
6.[OS v10.12, 10.13, 10.14, 10.15, 11.0]
Phenomenon: When a printer is used in a network connection, after switching users, as the scanner does not appear on ImageCapture, scanning may not be performed.
Solution: Re-establish the network connection.
7.[OS v10.12, 10.13, 10.14, 10.15, 11.0]
Phenomenon: When performing scanning from ADF at the resolution of 600 dpi, scanning for a reflection copy is performed.
Solution: Perform scanning with a resolution setting other than 600dpi.
History
[Ver.4.1.3a]
- macOS Big Sur (11.0) has been added as a supported OS.
- macOS Catalina (10.15) has been added as a supported OS.
- macOS Mojave (10.14) has been added as a supported OS.
- macOS High Sierra (10.13) has been added as a supported OS.
[Ver.4.1.3]
1.macOS Sierra (v10.12) has been added as a supported OS.
2.The following has been rectified.
(OS X El Capitan)
- Scanning from the operation panel cannot be executed when the USB is connected.
- Scanning cannot be executed with the IJ ScanUtility started up.
[Ver.4.0.0]
- OS X El Capitan (v10.11) has been added as a supported OS.
- Change the supported OS.
[Ver.3.3.4]
- OS X Yosemite (v10.10) has been added as a supported OS.
Setup:
Procedures for the download and installation
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.
All software and drivers at Driver-complete.blogspot.com are free. Brands and logos and even images on this site belong to the official owners of their respective products, we are just shortcuts to make your search easier.
0 Response to "ICA Driver Ver. 4.1.3a (Mac)"
Post a Comment